McDRY Ultra-Low humidity cabinet
McDRY moisture control reduces IC package and LED micro-cracking during the reflow process to zero.
Regarding McDry
This dry cabinet is manufactured by ERC, Co. Ltd, Japan, since 1990. Over 11,000 units have been delivered to approximately 2000 major electronics assemblers globally covering automotive, medical, aerospace, communicationsand other industries.
Key Features
●Matain 1%RH
●Conforms to IPC/JEDEC J-STD-033C、IPC-1601
●ESD safe design adheres to IEC-61340-5-1(ESD) Standard
●Dehumidifies ICs to prevent micro-cracking
●PCB storage and lithium product also ideal
●Alternative to baking, MBBs and nitrogen storage
Dry Box Storage Guideline by IPC/JEDEC
● IC Package standard : IPC/JEDEC J-STD-033C
To comply with the IPC/JEDEC J-STD-033C, IC packages should be stored in a dry box that maintains a humidity level equal to or less than 5% RH or 10 % RH in order to keep them from adsorbing moisture after opening its moisture-proof packaging.
However, on the factory floor, the humidity level in the dry box may rise due to the frequency of opening the doors to load and unload devices. In order to prevent such a situation from occurring, and to consistently maintain the required humidity levels of less than 5% or 10% RH, ultra-low humidity dry cabinets set at 1%RH or 2%RH may be most recommended.
Storage in a cabinet below 5%RH: No limit in floor life.
Performance of McDry
Performace of HM-1001B
Opening and Closing data of HM-1001B (unloaded)
High dehumidification performance, even if open and close door frequency
Product of McDRY
HM-1001B HM-1002B DXU-501A DXU-1001A
1200ℓ 1200ℓ 600ℓ 1200ℓ
DXU-1002B MCU-201 MCU-301 MCU-401
1200ℓ 135ℓ 300ℓ 400ℓ
MC-340 MCU-580 MC-1001A MC-1002A
300ℓ 520ℓ 1200ℓ 1200ℓ